The process of the equipment: The rubber covered shaft is uses as the main shaft, and the two back shafts are used as the accessory shaft, and the three shafts must be operated synchronously. The blade should be the round cutter, and the high-speed motor is used as the main drive dividing mechanism for driving. The speed and force of the receiving mechanism can be controlled by the speed regulating motor. It adopts the furl structure principle.
Performance parameters:
1. Production efficiency: 8m-15m/min 2. External dimension: 2200*2100*1500（L*B*H） 3. Power supply: 380V stable power supply (control voltage: DC24V) 4. Air source: 0.8Mpa 5. Power: 1.6kw 6. The equipment is equipped with 25 pieces of round cutters and blade holders.
The process of the equipment: The rubber covered shaft is uses as the main shaft, and the two back shafts are used as the accessory shaft, and the three shafts must be operated synchronously. The blade should be the round cutter, and the high-speed motor is used as the main drive dividing mechanism for driving. The speed and force of the receiving mechanism can be controlled by the speed regulating motor. It adopts the furl structure principle.
